Sanus VLL5-B1 Low Profile TV Wall Mount 42 Inch to 90 Inch

Low-Profile Fixed Mount for Large TVs

The SANUS VLL5-B1 is a premium fixed-position TV wall mount designed for compatible 42" to 90" televisions weighing up to 175 lb. Its ultra-low-profile design positions the TV approximately 0.91" from the wall for a clean, built-in appearance.

The mount also allows side-to-side positioning after installation, making it easier to center the TV even when the wall studs do not line up perfectly with the desired screen location.

Key Specifications

• Model: VLL5-B1
• Mount type: Fixed-position TV wall mount
• Recommended TV size: 42"–90"
• Maximum TV weight: Up to 175 lb
• Wall profile: Approximately 0.91" (23 mm)
• Maximum mounting pattern: Up to 700 × 400 mm
• Adjustment: Side-to-side positioning and post-install leveling
• Finish: Black
• Safety: UL Certified

Who Should Choose the VLL5-B1?

Choose the VLL5-B1 when you want your TV to sit as close to the wall as possible and do not need tilt, swivel, or extension.

It works especially well for eye-level installations in living rooms, media rooms, bedrooms, offices, conference rooms, and other spaces where a clean fixed installation is the priority.

Ultra-Low 0.91-Inch Wall Profile

The VLL5-B1 positions a compatible television approximately 0.91" from the wall, creating a much slimmer appearance than most tilting or full-motion mounts.

Because clearance behind the TV is limited, check the location and orientation of your TV's power, HDMI, Ethernet, and other connections before installation.

Side-to-Side TV Positioning

The television can slide laterally along the wall plate after installation, helping center the screen relative to furniture, cabinetry, a fireplace, or other room features.

This flexibility is useful when the desired TV position does not align exactly with the wall studs.

Post-Installation Leveling

The VLL5-B1 allows fine positioning adjustments after the television has been mounted, helping correct small leveling or alignment differences without removing the entire wall plate.

ClickStand Cable Access

SANUS ClickStand technology allows the bottom of the TV to be temporarily held away from the wall for easier access to cables and connections.

Once cable work is complete, the TV can be returned to its normal low-profile position and secured to the wall plate.

Audible Safety Lock

A built-in safety tab provides an audible confirmation when the television brackets engage with the wall plate, helping verify that the TV is securely attached.

Wide TV and VESA Compatibility

The VLL5-B1 supports a wide range of television mounting patterns up to approximately 700 × 400 mm.

Always verify your TV's exact VESA pattern, weight, mounting-hole configuration, and rear-panel clearance before installation. Screen size alone does not guarantee compatibility.

Supports TVs Up to 175 Pounds

The VLL5-B1 is designed for compatible televisions weighing up to 175 lb.

Do not exceed the mount's rated capacity, and include any accessories attached directly to the television when considering the total load.

Fixed Position Without Tilt or Swivel

The VLL5-B1 is a fixed-position mount. It does not provide viewing-angle tilt, extension, or swivel.

If the TV will be mounted significantly above eye level or glare is a concern, consider a compatible tilting or full-motion TV mount instead.

Wood Stud and Concrete Installation

The VLL5-B1 is designed for installation on suitable wood-stud or concrete wall structures when installed according to SANUS instructions.

Do not mount the VLL5-B1 into drywall alone. Steel-stud installations require the appropriate steel-stud mounting hardware.

Before Ordering

Confirm the following information for your television and wall:

• TV screen size between 42" and 90"
• Total TV weight within the 175 lb limit
• Compatible VESA or mounting-hole pattern up to 700 × 400 mm
• Suitable wood-stud, concrete, or properly equipped steel-stud wall construction
• Enough rear clearance for your TV's power and signal connections

What's Included?

The VLL5-B1 includes the wall plate, TV mounting brackets, locking hardware, and installation hardware for supported applications. Always follow the included SANUS installation instructions and use the correct hardware for your specific television and wall construction.

Complete Your TV Setup

• SANUS Mounts & Accessories
• TV Wall Mounts
• HDMI Cables

Need Help Checking TV Compatibility?

Send Bear Security Shop your exact TV model number and wall type. We can help confirm screen size, weight, VESA pattern, and whether the SANUS VLL5-B1 is compatible with your television.

What size TVs fit the SANUS VLL5-B1?

SANUS specifies the VLL5-B1 for compatible TVs from 42" to 90". TV weight and mounting pattern must also be within the mount's limits.

What is the maximum weight capacity?

The VLL5-B1 supports compatible televisions weighing up to 175 lb.

What VESA patterns does the VLL5-B1 support?

The mount supports a wide range of mounting patterns up to approximately 700 × 400 mm. Verify the exact VESA pattern of your TV before ordering.

How close does the VLL5-B1 hold the TV to the wall?

SANUS currently specifies a low-profile mounting depth of approximately 0.91" from the wall.

Does the VLL5-B1 tilt?

No. The VLL5-B1 is a fixed-position mount and does not provide viewing-angle tilt.

Does it swivel or extend away from the wall?

No. It does not use a full-motion arm. The TV remains in a fixed viewing position close to the wall.

Can I move the TV side to side after installation?

Yes. The television can slide laterally along the wall plate to help center the screen after the mount has been installed.

Can I level the TV after it is mounted?

Yes. The VLL5-B1 allows fine post-installation adjustments to help correct small leveling differences.

What is ClickStand?

ClickStand allows the bottom of the television to be temporarily held away from the wall, providing easier access to cables and connections behind the TV.

How do I know the TV is securely attached?

The mount uses a safety locking tab that provides an audible indication when the TV brackets are securely engaged with the wall plate.

Can the VLL5-B1 be installed on wood studs?

Yes. It is designed for suitable wood-stud installations when installed according to SANUS instructions.

Can it be installed on concrete?

Yes. The VLL5-B1 can be installed on suitable concrete using the correct installation method and hardware specified by SANUS.

Can I mount it directly to drywall?

No. The mount should not be installed into drywall alone. It must be secured to suitable structural support.

Is the SANUS VLL5-B1 UL Certified?

Yes. SANUS lists the VLL5 as safety tested and UL Certified.