Sanus LL11 B1 Ultra Slim TV Wall Mount 40 Inch to 85 Inch

Ultra-Slim Fixed Mount for Large TVs

The SANUS LL11-B1 is an ultra-slim fixed-position TV wall mount designed for compatible 40" to 85" televisions weighing up to 150 lb. Its super-slim design positions the TV approximately 0.55" from the wall for a clean, nearly flush-mounted appearance.

The LL11-B1 also includes ClickStand cable access, ProSet post-installation adjustment, and lateral positioning to help fine-tune the TV after the wall plate is installed.

Key Specifications

• Model: LL11-B1
• Mount type: Ultra-slim fixed-position TV wall mount
• Compatible TV size: 40"–85"
• Maximum TV weight: 150 lb (68 kg)
• Wall profile: Approximately 0.55" (1.4 cm)
• Mount dimensions: 35.3" W × 0.55" D × 22.5" H
• Mounting pattern: Universal, including common VESA patterns through 800 × 500 mm
• Stud compatibility: 16" and 24" on-center wood studs
• Adjustment: Lateral shift plus ProSet height and leveling adjustment
• Finish: Black
• Safety: UL Certified

Who Should Choose the LL11-B1?

Choose the LL11-B1 when you want a large compatible TV mounted extremely close to the wall and do not need tilt, swivel, or extension.

It is especially well suited to eye-level installations where maintaining the slimmest possible profile is more important than changing the viewing angle.

Ultra-Slim 0.55-Inch Wall Profile

The LL11-B1 positions a compatible television only about 0.55" from the wall, creating a very clean, low-profile appearance.

Because rear clearance is limited, check the location and direction of your TV's power, HDMI, Ethernet, and other connections before installation.

ClickStand Cable Access

SANUS ClickStand technology holds the bottom of the television temporarily away from the wall so you can reach cables and connections without removing the TV from the mount.

This is particularly useful on an ultra-slim installation where normal rear access is limited.

Quick-Release Tabs

Hidden quick-release tabs allow the TV brackets to disengage from the wall plate when access or removal is required.

The tabs remain concealed during normal use to maintain the clean appearance of the installation.

ProSet Post-Installation Adjustment

SANUS ProSet technology provides fine height and leveling adjustments after the television has already been hung.

This makes it easier to correct small alignment differences without removing and reinstalling the wall plate.

Side-to-Side TV Positioning

The television can slide laterally along the wall plate to help center the screen relative to furniture, cabinetry, or other room features.

This is especially useful when the ideal screen location does not line up perfectly with the wall studs.

Wide VESA Compatibility

The LL11-B1 supports a broad range of TV mounting patterns, including common VESA layouts from 100 × 100 mm through 800 × 500 mm, plus additional universal mounting configurations.

Screen size alone does not guarantee compatibility. Always verify your television's weight, mounting-hole pattern, and rear-panel clearance before ordering.

Supports TVs Up to 150 Pounds

SANUS rates the LL11-B1 for compatible televisions weighing up to 150 lb (68 kg).

Do not exceed the manufacturer's stated capacity, including accessories attached directly to the television.

16-Inch and 24-Inch Stud Compatibility

The LL11-B1 wall plate is designed to accommodate common 16" and 24" on-center wood-stud layouts.

Always confirm the wall structure and follow SANUS installation requirements before mounting the television.

Fixed Position Without Tilt or Swivel

The LL11-B1 is a fixed-position mount. It does not provide viewing-angle tilt, swivel, or extension away from the wall.

If the television will be mounted significantly above eye level or you need adjustable viewing angles, consider a compatible tilting or full-motion TV mount instead.

Dimensions

• Width: 35.3" (89.7 cm)
• Depth: 0.55" (1.4 cm)
• Height: 22.5" (57.2 cm)

Before Ordering

• Confirm the TV is within the 40"–85" recommended size range
• Confirm total TV weight does not exceed 150 lb
• Verify the TV mounting-hole pattern is compatible
• Check rear cable and power-connector clearance
• Confirm suitable wall structure and stud placement

Complete Your TV Setup

• SANUS Mounts & Accessories
• TV Wall Mounts
• HDMI Cables

Need Help Checking TV Compatibility?

Send Bear Security Shop your exact TV model number and wall type. We can help confirm screen size, weight, mounting pattern, rear clearance, and whether the SANUS LL11-B1 is compatible with your television.

What size TVs fit the SANUS LL11-B1?

SANUS specifies the LL11-B1 for compatible TVs from 40" to 85". TV weight and mounting pattern must also remain within the mount's limits.

What is the maximum weight capacity?

The LL11-B1 supports compatible televisions weighing up to 150 lb (68 kg).

How close does the LL11-B1 hold the TV to the wall?

The LL11-B1 positions a compatible television approximately 0.55" (1.4 cm) from the wall.

Does the LL11-B1 tilt?

No. The LL11-B1 is a fixed-position mount and does not provide viewing-angle tilt.

Does it swivel or extend?

No. It does not use a full-motion arm. The television remains in a fixed viewing position close to the wall.

What VESA patterns does the LL11-B1 support?

The LL11-B1 supports a broad universal mounting range, including common VESA patterns through 800 × 500 mm. Always verify your exact TV model before ordering.

Can I move the TV side to side after installation?

Yes. The television can slide laterally along the wall plate to help center the screen even when the wall studs are off center.

Can I level the TV after mounting it?

Yes. SANUS ProSet technology provides fine post-installation height and leveling adjustments.

What is ClickStand?

ClickStand temporarily holds the bottom of the television away from the wall so you can access cables without removing the TV from the mount.

Does the LL11-B1 have a quick-release system?

Yes. Hidden quick-release tabs allow the TV brackets to disengage from the wall plate when cable access or TV removal is needed.

Does it support 16-inch and 24-inch studs?

Yes. The LL11-B1 wall plate is designed to accommodate common 16" and 24" on-center wood-stud layouts.

Is the SANUS LL11-B1 UL Certified?

Yes. SANUS lists the LL11 as safety tested and UL Certified.